1、Steam turbine oil：
executive standard: GB11120-89, GB 2537-88
The product is suitable for the lubricating and sealing of electric
power, shipping, other industry steam turbine group, and hydraulic
turbine group.
With a good anti-oxidant stable antirusting the losing, resist
the steeping, resist emulsification, at the same time, it has good
lubricated performance, seal and cooling performance, it shall be
a kind of ideal lubricant for different machinery and equipment.
TSA steam turbine oil is divided into four trademarks of N32,
N46, N68, and N100.
Our company’s Guard brand steam turbine oil obtained the title
of the provincial level fine quality production.
2、Transformer oil：
Executive standard: GB2536-90
This product is suitable for voltage transformer and electric
equipment similar to the request of 350KV(including 350 KV).
With a high insulation strength, medium lose little, viscidity
light, dispel heat fast, and good cooling performance, the voltage
transformer produce the heat in operating is conducted out.It is
good to be anti-oxidant, with a long operation life, high flash
point, small evaporating, good low-temperature mobility which is
divided into 3 trade marks of 10, 25, 45 according to low-temperature
performance.
3、Hydraulic Oil：
Executive standard: GB11118—94
The serial hydraulic oil products with anti-oxidant, anti-wear
out and anti-rust is main suitable for fluid static pressure hydraulic
system. can be used in other mechanical equipments too.
L-HL used in low hydraulic pressure system, used in the oil bath
or circulation lubricating system of long updating oil period or
light load mechanical, L-HM improved it resist-wear out performance
on the basis of L-HL. Suitable for the low, middle, high hydraulic
pressure system, and is used in other middle loading mechanical
lubricating part. And there is a performance request of low-temperature
can select L-HV and L-HS oil for using. L-HG improved their glue
slipping lubricating oil on the basis of L-HM. can used in other
required good mechanical lubricate position.
4、Oil for engine using：
Executive standard:
Engine oil for petrol unit: GB11121—1995
engine oil for diesel engine: GB11122—1997
petrol: serial engine oil for petrol unit: SE. SF is used in the
lubrication of the car and some freight trains petrol machine. SD/CC,
SE/CC, SF/CD are the corresponding common lubricating oil of vehicle
for using petrol.
Engine oil of diesel vehicle: the products are used to lubricate
ordinary pressurized diesel engine truck or similar to strengthen
diesel engine. With good cleaning dispersiveness and heat oxidization.
5、Oil for compressor using：
Executive standard:
engine oil for compressor using: GB12691—90
Engine oil for light load spouting oil turn-round type air compressor:
GB5904—86
Frozen engine oil: GB/T16630—1996
The engine oil for air compressor using: This product is used
for piston-type and dropping oil turning round type air compressor
with oil lubrication, Including L-DAA and L-DAB, each variety have
32,46,48,68,100,150 five viscidity grade.
The oil for compressor using: two brands of No.13, No.19, No.13
is main used in the compressor of low or middle pressure (4MPa),
No.19 is main used in the lubrication of the multistage compressor
of high pressure.
This product have anti-oxidant rotten strong ability, have long
performance life, good antirust and resist wear out, meet circulation
lubricating system of the compressor change the request of cycle
for oil.
Frozen engine oil: Suitable for refrigeration compressor which
is used the ammonia mainly, CFCs (Fluorine chlorine hydrocarbon,
such as R12) and HLFCs (including hydrogen Fluorine chlorine hydrocarbon,
such as R22) as refrigeration cryogen.
6、 Oil for L-AN total spoilage system
using：
Executive standard: GB443—89
Total spoilage system originally named machinery oil, is most
ordinary lubricating oil in the lubricating oil, Used in total spoilage
lubricating system without special requirement for lubricating,
not to suitable for circulatory system using. The products have
5, 7,10,15,22,32,46,68,100,150 ten viscidity grades.
7、Executive standard：
Executive standard:
Industry closing type gear oil GB5903——1995
Common opening type gear oil SH/T0363—92
Common vehicle gear oil SH/T0350—92
GL-3 (No.18 hyperbolic gear oil) SH/T0350—92
Industry closing type gear oil: Generally suitable for middle,
heavy load, impulsion load gear wheel lubrication and the contact
stress of the gear wheel of device is smaller than 1100 Mpa including
metallurgy, coal, mine, cement and engineering machinery.
Common opening type gear oil: suitable for the lubrication of
opening type gear, chain and steel wire rope.
Common vehicle gear oil: Suitable for automobile manual gearbox
and spiral bevel gear lubrication.
GL-3 (No. 8 hyperbolic gear oil): Suitable for automobile hyperbolic
gear internal-combustion engine draw gear and industry gear lubrication
work under harsh terms.
Gear oil has good resisting oxidant, antirust, resist emulsification,
good high temperature anti-oxidant stable, the starting in low temperature.
It has a long performance life, it can form firm oil film in metal
surface, have fine protection function to gear.
8、Emulsification oil and specification
soluble oil：
Executive standard: SH／T0365-92
This product mixes with water in certain proportion to form emulsion,
with antirust, wash, pressured performance, suitable for metal process
\ cooling liquid using in the course of cutting.
9、Sulphurate cutting oil：
Executive standard: SH／T0364-92
Put mineral oil into the refined vulcanization mineral oil or
vegetable oil to make the sulphur oil, and affiliate the mineral
oil and mix to form sulphur-cutting oil. Suitable for lubrication
cooling when processing in metal cutting.
10、Quenching oil：
Executive standard: SH0564-93
The products is used for making steel and other metal quenching
material, with good cooling performance and useful life long, its
work feature is easy wash after quenching.
11、SD heat conduction oil：
Executive standard: Q/YSM125-89
The products is suitable for various kinds of oil boiler, oil
bath stove, bake room, hot person who finalize the design steam
gold-plating, divide into gold-plating, response cauldron, etc.
the heating process need to offer the heat conduction source of
the liquid phase. Without burnt environmental pollution, at the
same time, no pressure requirement to equipment, easy operation.
In the condition of isolated air, the highest suing temperature
can up to 280 ℃, 300 ℃, and 320 ℃.
12、Lubrication grease：
Executive standard:
Calcium base lubricating grease: GB491-87
Sodium base lubricating grease: GB/T 492-89
Sodium & calcium base lubricating grease: SH/T0368-92
Common lithium base lubricating grease: GB7324-94
Two sulphurate molybdenum pigeonhole lithium base lubricating
grease: SH/T 0587- 94
The products have good high low-temperature performance, water-resistance,
machinery stable, antirust, resist pressed & chemistry stability;
with a good adherence performance, easy stick in the metal rubbing
surface; with a good lubricated performance, long performance life.
Calcium base grease: used in mechanical equipments, such as automobile,
metallurgy, small-scale shipping, and textile. The scope of application
is - 10~60 ℃.
Sodium base grease: Used in high temperature, middle rotational
speed, middle load rub lubrication of position, not to suitable
for moist or water environment that keep in touch, use temperature
is not to higher than 110 ℃.
Common Lithium base grease: widely used in the lubrication position
in - 20 ---120 ℃ various kinds of rolling bearing and slipping the
bearing of mechanical equipments.
Two sulphurate molybdenum pigeonhole lithium base lubricating
grease: used in working temperature under 120℃ in low-speed rolling
and slipping friction position of various kinds of units.
13、Other special oil and various
kinds of lubricating oil additive: Executive standard：
Executive standard:
Mineral type vacuum pump oil: SH0528-92
Bearing oil (main shaft oil) SH/T0017-90
Rail oil: SH/T 0361-92
Axle oil: SH0139-95
Spindle oil: SH/T011-92
Industry petrolatum: SH0039-90
Mineral type vacuum pump oil: Suitable to do various kinds of
volume vacuum pump sealing and lubrication.
Bearing oil: Suitable for the industry mechanical equipments including
bearing of spindles, hydraulic pressure system, gear and steam turbine.
Rail oil: suitable to do the lubrication of the rail of different
accurate units.
|
